• 鑫丰环境

    追求卓越、缔造经典!

    鑫丰环境
  • 鑫丰产品

    追求永续经营, 创建高品质的产品!

    鑫丰产品
  • 客户留言

    我们期待您提出宝贵的意见和建议!

    客户留言
  • 联系鑫丰

    我们会尽我们所能为您服务!

    联系鑫丰
联系我们

东莞市鑫丰环境技术有限公司

联系人:林先生

电话:13902615764

座机:0769-22492117

传真:0769-22458758

邮箱:1075906485@qq.com

工厂地址:浙江省台州市玉环滨港工业区

东莞总部地址:东莞市东城雍华庭都市e站803

湿式抛光吸尘机
您当前的位置是:首页>>产品展示>>湿式抛光吸尘机

湿式抛光吸尘机

发布时间:2018-09-18 16:01:06  浏览次数:

1、水循环抛光吸尘一体机  Water Recycle Buffing Dust Collector 

   湿式抛光一体机的箱体(长1280mmX宽1760mmX高1900mm)采用304不锈钢板材料,是一款抛光粉尘处理的水帘喷淋吸附装置。打磨工位斜斗下面做抽屉,抛光产生的铜粉(铝粉等)很有回用价值,当铜粉(铝粉等)堆满时拿出倒掉并回收,操作简单方便。在风机引风下被吸入的金属粉尘遇水帘会及时熄灭掉。金属粉尘将继续通过第二道除尘喷淋处理,当残留粉尘经过缓冲空间会和喷淋雾化水结合一起掉落(如有毛细纤维和抛光蜡等)。掉落后的残渣进入缓存水池低位下口做一道过滤网。把所经过的粉尘全部过滤掉,过滤后的清洁水流流到水箱后,经水泵打到水槽循环使用。设备控制箱采用防爆,隔爆, 防尘, 防水, 保护等级IP54, 安全可靠。该设备不适用含钠、镁、鏻、锌合金成分的金属打磨。

 

     The polishing dust collector is a water recycle system adapts 304 stainless steel. In order to collect the metal dust for recycle, the bucket drawer is designed and easy to operate. The metal dust will be absorbed into the mechine. The water washes the dust down into the water tank. The untreated dust will continue go through the  buffer space, and fall with water together. After falling debris goes into the buffer pool, and be filtering by the net filter at the edge of the pool. The clean water flows to the water tank to support the water recycling system. The equipment control box adopts explosion proof, flameproof, dustproof and waterproof, protection grade IP54, safe and reliable. Metal with components of sodium, magnesium, zinc alloy, phosphonium metal grinding can not be applied.

5ba0b2f06916b.jpg

 
    

2、干式抛光吸尘一体机   Pulse Baffing Dust Collector

 

  自清洗脉冲抛光吸尘一体机的箱体采用彩钢板材料,是一款抛光粉尘处理的干式脉冲吸附装置。打磨工位斜斗下面做抽屉,抛光产生的铜粉(铝粉等)很有回用价值,当铜粉(铝粉等)堆满时拿出倒掉并回收,操作简单方便。当含有粉尘的气体从进风口进入吸尘器的滤芯,经滤芯外表面进行过滤,已经净化的气体从滤芯内部向上流出,也可以通过一根长软管进行排出。吸附在滤袋外表面上的粉尘,当粉尘达到一定的程度时,由程序控制定时进行脉冲反吹,即高压空气喷向长软管的同时将已净化的气体反吹向滤芯内,形成较大的压差,从而将粉尘清扫下来,达到清灰目的,并使整个设备及系统阻力保持稳定,反吹下来粉尘落到下箱体底部可以拉出集尘箱回收或者是作其他的处理。设备分单面抛光(XF-PD240)和双面抛光(XF-PD480).

 

     The Pulse Baffing Collector is made of color plate material, which is a dry pulse adsorption device for the treatment of polished dust. The copper bar (aluminum powder and so on) produced by polishing can be reused. When the copper powder (aluminum powder and so on) is stacked, it can be removed and recycled, and the operation is simple and convenient. When the air containing dust enters the filter element of the cleaner from the inlet, it is filtered through the outer surface of the filter core. The purified gas flows upward from the inside of the filter core, and can also be discharged through a long hose. The adsorption of dust in the outer surface of the bag on the dust, when reaches a certain level, the timing pulse back blowing control by the program, namely high pressure air spray to the long hose and gas purification of blowback to filter, the formation of large differential pressure, and the dust is swept down, to reach the cleaning purpose the equipment and the resistance of the system remains stable, anti dust blowing down to the bottom of the box can be pulled out under the dust box is for recycling or other processing.

 5ba0b31019b27.jpg




上一条:第一篇   下一条:最后一篇
开元棋牌游戏大全_东莞恒威新能源环境技术公司